• 1



Paving bricks without seams

Page view
Once again, it's a cliché to say that it's time to leave tiling and paving tiles. At this stage, there are very few ceramic faucets that can really make a stitching and paving tile, especially the three-and-four-tiered city tiles are the most popular. In addition to customers who partially use glazed tiles to leave the seams, other products such as end-use customers using polished tiles, microcrystalline stones, etc., will rarely be left over. Next, we will discuss in detail the basic issues related to tile laying and other related issues.
=== Why do you want to leave seams?
1, any object itself is stored in the expansion coefficient associated with the temperature, leaving the seam can be very good to avoid the tiles due to temperature rise caused by thermal expansion and contraction caused by tile fracture, arch tile phenomenon.
 2. If tiles do not leave seams during paving construction, it is easy to have uneven paving. In fact, this is not due to the quality problems of the tile products itself, but because the mud moisture does not appear in the process of paving the mixing mud. Evenly, after the completion of the construction, the mud is highly condensed and uneven tension results in unevenness. The left seam is a good way to avoid such problems.
 3, tile left seams produce a regular line, you can achieve a certain degree of three-dimensional effect. At the same time, its role not only beautifies the overall effect of paving space, but also to a certain extent, is also a great relief for visual fatigue.
 4, in the future maintenance and maintenance can also be added to facilitate, for example: due to artificial weight caused by accidentally falling tiles damaged, if you leave the seam can easily replace the damaged tiles instantly.
=== Standard construction process for tiles?
 Tile paving standard process: 1, cleaning and finishing the grass-roots level → 2, cement mortar leveling → 3, calibration high, bomb line → 4, install the standard block → 5, the election of materials → 6, infiltration → 7, paving → 8, Irrigation → 9, cleaning → 10, maintenance delivery.
=== Why is it difficult to spread stitching on the terminal?
 There are many factors that make it difficult to spread the seam-laying tiles.
First, the misunderstanding of end-stitching and paving by end-consumers means that it is not easy to clean the left-and-out stitches, the gaps are easy to hide, and the understanding of them is not clear enough;
Second, the reasons for laying ceramic tile workers are because the time for stitching and laying ceramic tiles is longer than that for seamless use, and the process is relatively complicated;
Thirdly, some dealers bundle ceramic tile joints and tile flatness, and some dealers do not hesitate to use lies to achieve sales.
Fourth, manufacturers do not have proper guidelines for end-channel channel management.
=== Standards for leaving seams when leaving a seam?
In fact, there is not a fixed standard for leaving seams. Generally, left seams can be left to 3 to 5 mm. In addition, according to actual factors such as the type and size of the brick tile, the total area of ​​the tile, etc., the best standard that should be adopted during construction is determined.